Floor protection

Seamless floor systems for production areas, warehouses, chemical rooms and wash-down areas, built to the traffic and exposure of each space.

Request a site visit
Kennel floor finished with CHEMCLAD SC
Overview

Floors specified for what happens on them

An industrial floor fails for one of four reasons: traffic, impact, chemicals or water. Forklifts abrade the surface and break down joints. Dropped loads spall it. Process chemicals and cleaning agents eat into the cement. Water carries all of it further into the slab. We look at what the floor is exposed to and build the system around that.

For general traffic, ENECLAD FPS seals the concrete under an abrasion-resistant, easily cleaned coating, over an ENECLAD CFS or ENECLAD SPS primer where the slab is dusty or rough. Where the concrete is already damaged, it is rebuilt first. ENECRETE DuraFill is broadcast with aggregate to resurface whole areas or fill deep holes, and ENECRETE DuraQuartz repairs joints, edges and impact damage. Both are covered in more detail under concrete repair.

Floors in chemical service are finished with CHEMCLAD SC or CHEMCLAD XC. Wet areas, ramps and steps can be given a SAFETYCLAD DuraGrip anti-slip finish at whatever texture the area calls for. Exterior slabs and walkways that need to shed water are treated with ENESEAL MP/HS, which penetrates the surface and keeps its natural appearance. A floor system installed at a major train station was still performing after ten years of foot traffic.

Before and after

Floor protection projects

On site
Food plant corridor floor after resurfacing
Food plant corridor floor after resurfacing
Splash pad resurfaced with a slip-resistant coating
Splash pad resurfaced with a slip-resistant coating
Typical work

Where it is used

Production and process floorsWarehouses and loading docksChemical and pump roomsControl rooms and workshopsWash-down and food areasKennels and animal care areasRamps, steps and walkwaysAquatic and splash-pad surfaces
Systems for this job

Products for floor protection

ENECLAD FPS, ENECLAD CFS and ENECLAD SPS

A floor protection system, a clear sealer and a self-priming screed for concrete floors under heavy traffic.Floor systemView product →

ENECRETE DuraFill

A polymer system combined with aggregate for broadcast floors and for filling deep holes and cavities in concrete.Two-component, with aggregateView product →

ENECRETE DuraQuartz

A repair compound for concrete exposed to impact, abrasion and chemical attack. Mixes from a liquid to a stiff mortar.Three-component compoundView product →

ENESEAL MP

A penetrating, invisible water repellent for concrete and masonry.Single-component liquidView product →

ENESEAL MP/HS

The same invisible protection, formulated for horizontal surfaces and foot traffic.Single-component liquidView product →

CHEMCLAD SC

A 100% solids coating that protects metal and concrete from corrosion and chemical attack. NSF/ANSI/CAN 61 certified for potable water.Brush or roller coatingView product →

CHEMCLAD XC

The highest-performance CHEMCLAD coating, for extreme chemical exposure.Brush or roller coatingView product →

SAFETYCLAD DuraGrip

An anti-slip surfacing system for walkways, steps, ramps and decks, tailored to the level of grip required.Polymer and aggregate systemView product →

We specify the system after inspecting the equipment or structure and its operating conditions.

Schedule a no-cost
site visit