Concrete repair
Spalled, cracked and eroded concrete rebuilt with polymer repair compounds that bond permanently and return to service in hours.
Request a site visit
Repairs that are stronger than the concrete around them
Polymer repair compounds bond to prepared concrete with more strength than the concrete has itself. They cure in hours, hold their volume as they cure and resist the impact, abrasion and chemicals that caused the damage in the first place.
ENECRETE DuraQuartz is the compound we use most. It is mixed on site to the consistency the repair needs, from a pourable liquid for cracks to a stiff mortar that holds its shape on vertical and overhead surfaces. Equipment bases, column bases, stair treads, expansion joints and tank walls are typical repairs. For larger volumes, ENECRETE DuraFill is extended with locally sourced aggregate to fill deep cavities or resurface an entire floor.
Where water is coming through the concrete, ENECRETE WP stops the flow and ENECRETE WS seals the wall. A finished repair is often top-coated for its environment: CHEMCLAD in chemical service, ENESEAL CR outdoors. After a fire, transformer bases were rebuilt and protected this way, and a clarifier tank repaired with ENECRETE DuraFill was inspected six years later.
Concrete repair projects


Cooling tower column base
ENECRETE DuraQuartz, top-coated with ENESEAL CRSee the product →

Trench drain
Concrete rebuilt along the drain channelSee the systems for this work →

Fire-damaged transformer bases
ENECRETE DuraFill, then ENESEAL CRRead the project →

Pump base
Rebuilt with ENECRETESee the systems for this work →

Where it is used
Products for concrete repair
ENECRETE DuraFill
A polymer system combined with aggregate for broadcast floors and for filling deep holes and cavities in concrete.Two-component, with aggregateView product →ENECRETE DuraQuartz
A repair compound for concrete exposed to impact, abrasion and chemical attack. Mixes from a liquid to a stiff mortar.Three-component compoundView product →ENECRETE WP
A rapid-setting cementitious plug that stops running water through concrete and masonry in about a minute.Powder, mixed with waterView product →ENECRETE WS
A waterproofing sealer for concrete, brick and block, used on its own or over ENECRETE WP.Two-component sealerView product →We specify the system after inspecting the equipment or structure and its operating conditions.
Concrete repair in practice
ENECON NorCal projectENECRETE WP and ENECRETE WS stop hydrostatic pressure leaks in underground vaults
Three underground fuel tank vaults at a major Northern California international airport were sealed against hydrostatic leaks.

40 years of chemical attack at a juice factory eliminated with CHEMCLAD and ENECRETE DuraFill
A 40-year-old acid-eroded concrete floor was repaired and protected in place.

Wastewater plant uses ENECRETE and CHEMCLAD to protect a concrete tank
New concrete on a dissolved air flotation tank was sealed against the harsh chemical environment around it.

ENECRETE and CHEMCLAD repair and protect a concrete effluent tank
A chemically attacked effluent tank was rebuilt to its original specification and lined against future attack.

Six years later, ENECRETE DuraFill and CHEMCLAD GP in almost perfect condition on a wastewater clarifier tank
A concrete clarifier that was too expensive to replace was repaired, and still looks and performs as intended six years on.

ENECRETE and ENESEAL repair fire-damaged concrete bases of 37-ton transformers
Cracked concrete bases left by a transformer fire were rebuilt and sealed before the replacement units were mounted.
Schedule a no-cost
site visit