Cavitation repair
Cavitation damage rebuilt and resurfaced with elasto-ceramic polymers that absorb repeated impact.
Request a site visitA surface that absorbs the impact
Cavitation occurs where pressure in a moving liquid drops low enough for vapor bubbles to form. When those bubbles collapse against a metal surface they strike it with enough force to remove material, a little at a time, until the surface is deeply pitted. Impeller vanes, pump volutes, propellers, Kort nozzles, valve seats and turbine components are the usual casualties.
FLEXICLAD DuraTough DL and FLEXICLAD DuraTough DP are made for this kind of repeated impact. They combine the strength and adhesion of an epoxy with the resilience of an elastomeric urethane, so the surface gives slightly under each bubble collapse and recovers. DuraTough DP is a paste for rebuilding cavitated areas to profile. DuraTough DL is the liquid grade for coating and resurfacing.
Where the equipment also runs at elevated temperature, the rebuild is made in METALCLAD CeramAlloy HTP and sealed with CeramAlloy HTL. Cavitation damage usually appears alongside ordinary erosion and corrosion, so these repairs are often combined with the systems described under equipment repair and fluid flow protection.
Cavitation repair projects
Where it is used
Products for cavitation repair
FLEXICLAD DuraTough DL
A liquid elasto-ceramic coating for equipment exposed to cavitation.LiquidView product →FLEXICLAD DuraTough DP
The paste grade, for rebuilding cavitated areas and for flexible seals, gaskets and seats.PasteView product →METALCLAD CeramAlloy HTL
The protective coating for elevated-temperature service, applied over CeramAlloy HTP or on new components.Viscous liquidView product →METALCLAD CeramAlloy HTP
The rebuilding paste for equipment that runs at elevated temperatures: boilers, stacks, scrubbers, pump casings.Trowelable pasteView product →We specify the system after inspecting the equipment or structure and its operating conditions.
Schedule a no-cost
site visit

