Certifications and approvals
ENECON systems are tested and approved by independent laboratories, standards bodies and classification societies. Each entry lists the products it covers and links to the certificate or test report.
Request a site visit





ASTM E84 Class A
ENESEAL CR is certified Class A under ASTM E84, the standard test method for the surface-burning characteristics of building materials. Tested by an accredited third-party laboratory as a two-coat system on steel, it recorded a Flame Spread Index of 10 and a Smoke Developed Index of 40. Class A is the highest classification in the test and requires a flame spread index of 25 or less and a smoke developed index of 450 or less.
The classification describes surface-burning behavior. Fire-resistance requirements for a project are set by the building code and the authority having jurisdiction.
NSF/ANSI/CAN 61

CHEMCLAD SC is certified by NSF to NSF/ANSI/CAN 61 for contact with drinking water. The listing covers tanks of 25 gallons and larger, pipe of 12 inches and larger, and pumps, valves and fittings, applied in two to four coats over the CHEMCLAD SC/P primer.
Cool Roof Rating Council

ENESEAL HR is rated by the Cool Roof Rating Council, which publishes independently measured solar reflectance and thermal emittance values for roofing products. Energy codes and green building programs use CRRC ratings to qualify a cool roof.
ASME PCC-2-2018
METALCLAD DuraWrap meets the requirements of ASME PCC-2-2018, Article 401, Mandatory Appendix 401-II, for nonmetallic composite repair of pressure equipment and piping in high-risk service. Qualification covered material testing and short-term spool survival testing, in which a repaired pipe held 3,167 psi. The complete test report is available on request.
ABS Type Approval
The American Bureau of Shipping has type-approved these ENECON systems for use in marine and offshore environments.
Korean Register Type Approval

The Korean Register has approved these ENECON systems under its rules and entered them in its List of Approved Manufacturers and Type Approved Equipment.
ISO 9001:2015

ENECON Corporation manufactures every ENECON system under a quality management system certified to ISO 9001:2015.
Schedule a no-cost
site visit