Projects / Concrete repair / October 2025

ENECRETE WP and ENECRETE WS stop hydrostatic pressure leaks in underground vaults

Three underground fuel tank vaults at a major Northern California international airport were sealed against hydrostatic leaks.

Water seeping through a horizontal joint in the vault wall before repair
Before
Vault wall joint sealed with ENECRETE WP and ENECRETE WS
After

Three underground fuel tank vaults were experiencing hydrostatic pressure leaks at a major Northern California international airport. Sensors inside the vaults that warn of any fluid on the vault floors had been triggered several times. The decision was made to fill the vault wall joints with ENECRETE WP and to then seal the joints with ENECRETE WS.

The first step, after following all local and federal confined space safety precautions, was to remove a previously installed joint sealer that had failed. Manual grinders were then used to remove all the existing coating from the walls to provide a clean and rough surface for ENECRETE WP and ENECRETE WS to anchor and bond to.

Crew set up for confined-space entry at an underground vault
Crew set up for confined-space entry at an underground vault.
Technician entering the vault through the access hatch
Technician entering the vault through the access hatch.

ENECRETE WP was used to plug the joints. Two coats of ENECRETE WS were then applied to seal and protect the entire prepared area, providing a breathable micro-porous coating that seals but also allows any moisture to evaporate.

After this application, the area received a record-breaking month of rainfall. The vaults were constantly inspected, and no leaks were found.

Schedule a no-cost
site visit